Canon MAXIFY MB2020 Ink

Shop effective ink replacements that cost 84% less than expensive original Canon MB2020 ink cartridges.

Customer-recommended. Get original Canon print results at a much lower price. Compatible Canon MB2020 ink replacements are built to fit and work in your printer just like an original Canon cartridge. Compatible replacements are built with the latest chip and shows accurate ink levels. Longer lasting high yield Canon MB2020 ink replacements contain with more ink and prints the same number of pages as an OEM high yield Canon cartridge.

All Canon MB2020 ink replacements by LD Products come with a Lifetime Guarantee. Who is LD Products? LD Products is a company whose main goal is to provide more affordable ink options to consumers. OEM (original equipment manufacturer like Canon, HP, Epson, etc.) brand ink cartridges are notorious for being too expensive and LD believes that consumers deserve to have lower priced options. Learn more about LD here.

Canon MAXIFY MB2020 Ink

Ink Cartridges for Canon MB2020

Common Canon MAXIFY MB2020 Ink Questions

What ink does Canon MAXIFY MB2020 use?

The Canon MB2020 printer uses four (4) Canon PG-1200 or 1200XL ink cartridges: one (1) black, one (1) cyan, one (1) magenta, and one (1) yellow ink cartridge. You can find low-cost compatible Canon PG-1200XL ink replacements that work just as well as original Canon cartridges.

How many pages can I print with Canon MB2020 ink?

You can print 400 pages if you use standard sized ink cartridges and 1,200 pages if you use high yield ink cartridges. Canon PG-1200 ink cartridges are available in high yield sizes that contain more ink and last longer than standard cartridges.

The page yields of Canon MB2020 ink cartridges are as follows:

Standard Canon PG-1200 Ink Yields

  • Black (BK) - 400 pages
  • Cyan (C) - 300 pages
  • Magenta (M) - 300 pages
  • Yellow (Y) - 300 pages

High Yield Canon PG-1200XL Ink Yields

  • Black (BK) - 1,200 pages
  • Cyan (C) - 900 pages
  • Magenta (M) - 900 pages
  • Yellow (Y) - 900 pages

How do I change the ink in my Canon Maxify MB2020?

  1. Make sure your MAXIFY MB2020 is powered on.
  2. If any of your ink cartridges need to be replaced, your display screen will notify you.
  3. Open the front cover of your printer. The printhead will move to replacement position. Do not touch the printhead while it's moving, wait for it to stop on the left side.
  4. Once the printhead stops moving, push up the eject lever in front of the cartridges. This will release the cartridge that needs to be replaced.
  5. Remove packaging from your new ink cartridge. Be careful not to make contact with the nozzles and the gold contacts, touching these might cause printing problems.
  6. Replace empty cartridge with the new one. Check that the color label on the cartridge and the color guide on the printhead matches.
  7. Push the new cartridge forward until it clicks into place.
  8. If you see "Exit" on your printer's display screen, proceed to step 9. If you see "Next", that means you need to replace another ink tank: repeat steps 3 - 8.
  9. After hitting "Exit", your printhead will move all the way to the left. At this point, close the front cover of the MB2020.
  10. Give your printer about 1-2 minutes before printing.

 

 

Reliability for a Lifetime

Our 100% satisfaction guarantee means you can shop with peace of mind. Our cartridges have been tested and monitored for performance quality and page yield. In the event that you are dissatisfied with your purchase, we will do our best to make it right. All of our LD-brand compatible ink and toner products are backed by a lifetime guarantee.

Search engine powered by ElasticSuite